Description:
1.18w 2g11 pl lamp2.perfectly replace PHILIPS 2g11 tube
3.Defect below 8/1000
4.2years warranty
5.CE, RoHS, FCC, PSE, SAA
high lumen led 18w 2g11pl lamp
------------------------------------------------------------------------------------------------
Specifications of 18w 2g11 pl lamp: |
1) Working Voltage: 85-265VAC |
2) Power Factor: >90% |
3) Lighting Efficiency: >85% |
4) Color Rendering Index: >75% |
5) Work Frequency: 50-60HZ |
6) Constant Circuit Error: <2% |
7) Static Power Consumption: <0.5W |
7) Ambient Temperature: -20-85°C |
8) Microwave/Noise: <240mV |
9) Material: AL PC shell |
10) Short Circuit Protection: available |
11)SIZE: 542*38 lm |
12) Certificate: CE, RoHS, PSE, FCC, |
13) Color temperature: warm white: 3000-4500K; Natural White:5000-6500K; Cool White: 7000K |
Items of 2g11 ledtube
Item No. | Power | Length (mm) | LED Q''ty | Luminous Flux (lm) | Input voltage | Replace PHILIPS | Packing Size(mm) | Caron Qty | G.W. (kg) |
GP-2G11-3528-120A8W | 8W | 227*38 | SMD-120 | 660±5% | 85-265VAC | 18W | TBD | TBD | 0.18 |
GP-2G11-3528-180A12W | 12W | 322*38 | SMD-180 | 990±5% | 85-265VAC | 24W | TBD | TBD | 0.21 |
GP-2G11-3528-220A15W | 15W | 417*38 | SMD-220 | 1210±5% | 85-265VAC | 36W | TBD | TBD | 0.25 |
GP-2G11-3528-270A18W | 18W | 542*38 | SMD-270 | 1480±5% | 85-265VAC | 40W | TBD | TBD | 0.33 |
GP-2G11-3528-330A22W | 22W | 542*38 | SMD-330 | 1810±5% | 85-265VAC | 55W | TBD | TBD | 0.42 |
Sizedetails and installation of 18w 2g11 pl lamp:
Why LED?
LED’S are 100% recyclable. Unlike fluorescent counterparts andhigh intensity discharge(HID) technologies
LED’S contain no toxic material, hazardous mercury, or halogengases.
LED’S emit no ultraviolet (UV) rays or infrared (IR) radiation.Unlike compact fluorescent, LEDS do not require a Material SafetyDate Sheet (MSDS) or hazardous waste disposal.
Retrofitting to LED’s creates energy efficiencies, reducing ourcarbon footprint-the impact of human activities regarding theamount of greenhouse gases produced.
Compact fluorescent light bulbs contain a remarkable amount oftoxic mercury- 4mg to 6mg per bulb.
Fluorescent light tubes contain approximately 20mg of mercury pertube
Each 4mg of mercury can contaminate 6, 000 gallons of freshwater.
In the USA, if bulbs were replaced with LED equivalents nearly sixtons of mercury would disappear out of the system in a very shorttime.
Mercury can prove harmful to developing children; according to theNational Academy of Sciences, over 60, 000 children are born eachyear at risk from adverse Neurodevelopmental effectsfollowing exposure to mercury.
LED’s do not use ballasts which produce harmonic noise- or “hum
about us:
high lumen led 18w 2g11 pl lamp